Loctite 609 – Retaining Compound – 10ml

As a type of anaerobic adhesive, retaining compounds are essential for the precision assembly of press- and slip-fitted parts, as well as any component that is used within systems subject to high vibration in challenging environmental conditions. Capable of filling spaces between individual components, they cure to form a strong bond and allow for the transmission of high loads without the need for air. This means sealed components and machine designs can still achieve high strength and temperature resistance across a variety of substrates.

Used across a broad range of mechanical components, as well as for bearings, shafts, and cylinder liners, retaining compounds are most commonly found within the automotive and heavy machinery industries. However, they can also be used in any industry where metal-to-metal adhesion is required for moving parts. Additionally, retaining compounds help manufacturers to avoid unnecessary machining of a broad range of mechanical components during MRO.

There are a number of reasons electrically high strength retaining compounds might be chosen over other methods of bonding and adhesion, and the advantages are clear. In fact, any type of component that will be under stress, that has a small adhesion area, and that is found within moving machinery, can benefit from retaining compounds. Moreover, any component that is at risk of fretting leading to corrosion can benefit from these materials to reduce wear and potential failure during operation.

Advantages of LOCTITE® Retaining Products:

LOCTITE® Retaining Products Offer:

• Higher strength with simplified and less costly designs
• Reduced dependence on machining tolerances
• Corrosion and fretting prevention
• Even load and stress distribution over the joint

LOCTITE® 609 High strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts.
LOCTITE® 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in fractional and sub-fractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.

• Low viscosity
• Prevents loosening and leakage from shock and vibration
• Augments press fits
• Tested to the lot requirements of Military Specification Mil-R-46082B (this is a regional approval)

FAQ
Q: If anaerobics cure in the absence of air, how come they don’t cure in the sealed bottle?
A: The anaerobic bottles are specially formulated oxygen-permeable polyethylene bottles that allow air to pass through the wall of the bottle to maintain stability of the liquid product inside the container. The bottle is also not filled to the top for stability purposes. A 10 ml bottle does indeed contain 10 ml’s of product in a larger bottle, and a 50ml bottle does indeed contain 50ml’s of product in a larger bottle.